Manual Duplex Printing On Mac

• Manual Duplex Printing Mac
• Manual Duplex Printing On Macbook Air

Code gnome-manual-duplex is a utility that adds manual duplex to the 'Print' menu. It is a CUPS Virtual Printer as well as a standalone utility. It works with.ps and.pdf files. How to use duplex or double sided printing in Mac. Place the printed pages back in the paper tray face down. Point the top of the pages toward the printer and make sure the edges of the pages are square with each other.

You can print on both sides of a sheet of paper.

• Duplex printing is available for the following paper sizes.

  A4, A5, B5, Letter, Legal (13 inches), Legal (13.5 inches), Legal (14 inches), Executive, 8.5SQ (8.5in x 8.5in), Folio (210 mm x 330 mm), 16K (197 mm x 273 mm, 195 mm x 270 mm, 184 mm x 260 mm), Custom size

• Duplex printing is available for the following media weight.

  64 to 176 g/m² (17 to 46.8 lb)

  Do not use media weight other than the above, because paper jams may occur.

Manual Duplex Printing Mac

Note

This function may not be available for some applications.

Memo

Manual Duplex Printing On Macbook Air

When printing on custom size paper, duplex printing is available for the following width and length ranges.

• Width: 148 to 216 mm (5.8 to 8.5 inches)

• Length: 210 to 356 mm (8.3 to 14.0 inches)

Manual Duplex Printing Mac

Note

This function may not be available for some applications.

Memo

Manual Duplex Printing On Macbook Air

When printing on custom size paper, duplex printing is available for the following width and length ranges.

• Width: 148 to 216 mm (5.8 to 8.5 inches)

• Length: 210 to 356 mm (8.3 to 14.0 inches)

For Windows PCL Printer Driver

1. Open the file to print.

2. Click [Preferences].

3. Select [Long Edge] or [Short Edge] from [2-Sided Printing] on the [Setup] tab.

4. Change other settings if necessary, and then click [OK].

For Windows PS Printer Driver

1. Open the file to print.

2. Click [Preferences].

3. Select [Flip on Long Edge] or [Flip on Short Edge] from [Print on Both Sides] on the [Layout] tab.

4. Change other settings if necessary, and then click [OK].

For Mac OS X

1. Open the file to print.

2. Select [Long-Edge binding] or [Short-Edge binding] from [Two-Sided] on the [Layout] panel.

3. Change other settings if necessary, and then click [Print].

Memo

If setting details are not displayed in the print dialog, click [Show Details] at the bottom of the dialog.